Outdoor Planter

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

Features The round Corten steel planter gives gardens a powerful, stylish, and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain standing in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline.The warranty is void if you drill or grind in a manner that is not prescribed. During the rusting process, rust water may run off the product. Planting advice: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting. Use no overflow pipe; no water must remain standing in the Corten steel planter.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 120x120x100 cm Mat Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that the ensure that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving once filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 120x120x80 cm Mat Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any ensure that moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving while filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 120x120x60 cm Mat Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any ensure that moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving while filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 120x120x40 cm Mat Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any ensure that moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving while filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 100x100x80 cm Mat Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any ensure that moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving while filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 100x100x60 cm Mat Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any ensure that moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving while filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 80x80x80 cm Matte Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product does not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving once filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 80x80x60 cm Matte Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product does not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving once filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This DESIGN planter with straight corners belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The DESIGN planter is also extremely useful as a divider in hospitality establishments. The DESIGN polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof as standard. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching DESIGN polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester is extended into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Color options: Traffic White (RAL 9016) - Matte (we supply this color as standard) Black Grey (RAL 7021) - Matte Anthracite Grey (RAL 7016) - Matte Jet Black (RAL 9005) - Matte All RAL colors are available upon request. Please contact us. DESIGN Planter 80x80x40 cm Matte Specifications: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Finished with a double folded edge. Material thickness of the polyester is 3 mm. Includes circles for drilling drainage holes and a gutter for drainage. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product does not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, install the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. Do not place them on beams, stones, etc. The planter is not suitable for moving once filled. Clean at least twice a year with BIO cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. Planting advice Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable anti-root fabric over this. Apply the soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 40x40x80 cm Specifications: 5 years warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Supplied as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 40x40x60 cm Specifications: 5 years warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Supplied as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 40x40x40 cm Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Delivered as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 50x50x80 cm Specifications: 5 years warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Supplied as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 50x50x50 cm Specifications: 5 years warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Supplied as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 70x70x70 cm Specifications: 5 years warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Supplied as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 80x80x40 cm Specifications: 5 years warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Supplied as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 80x80x60 cm Specifications: 5 years warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Supplied as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 80x80x80 cm Specifications: 5 years warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Supplied as a self-assembly product and can therefore also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 100x100x40 cm Specifications: 5 year warranty. Corten steel Planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Delivered as a self-assembly product, so it can also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 100x100x60 cm Specifications: 5 year warranty. Corten steel Planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Delivered as a self-assembly product, so it can also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 100x100x80 cm Specifications: 5 year warranty. Corten steel Planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Delivered as a self-assembly product, so it can also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less

This self-assembly Corten steel planter belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. The Corten steel planter is also extremely useful as a partition in hospitality establishments. Please note! Bottom not included; this can be ordered separately. The Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. This gives the planter a long lifespan. Popular dimensions of Corten steel planters: Corten steel planter 50x50x50 Corten steel planter 60x60x60 Corten steel planter 100x100x40 Corten steel Planter 120x120x80 cm Specifications: 5 year warranty. Corten steel Planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Standard material thickness of the Corten steel is 1.5 to 2 mm. Delivered as a self-assembly product, so it can also be placed around an already planted tree or plant. Includes bolts, nuts, and an assembly manual. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure good drainage. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. Planting advice: Fill the planter with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable weed control fabric over the pebbles. Cover the weed control fabric with soil suitable for your type of planting.

Read more less