Rectangular Planter

This planter on wheels with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This polyester planter is also extremely useful as a divider in hospitality establishments. Features Polyester Planter on Wheels This polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof by default. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester extends into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Polyester Planter on Wheels SPECIFICATIONS: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Easy to move thanks to the wheels. Please note! Load capacity is 450 kg per wheel. Finished with a double folded rim. Polyester material thickness is 3 mm. Includes recessed wheels and circles for drilling drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage after drilling the drainage holes. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, place the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. So do not place them on beams, stones, etc. Clean at least twice a year with bio cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter on wheels with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This polyester planter is also extremely useful as a divider in hospitality establishments. Features Polyester Planter on Wheels This polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof by default. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester extends into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Polyester Planter on Wheels SPECIFICATIONS: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Easy to move thanks to the wheels. Please note! Load capacity is 450 kg per wheel. Finished with a double folded rim. Polyester material thickness is 3 mm. Includes recessed wheels and circles for drilling drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage after drilling the drainage holes. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, place the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. So do not place them on beams, stones, etc. Clean at least twice a year with bio cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter on wheels with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This polyester planter is also extremely useful as a divider in hospitality establishments. Features Polyester Planter on Wheels This polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof by default. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester extends into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Polyester Planter on Wheels SPECIFICATIONS: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Easy to move thanks to the wheels. Please note! Load capacity is 450 kg per wheel. Finished with a double folded rim. Polyester material thickness is 3 mm. Includes recessed wheels and circles for drilling drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage after drilling the drainage holes. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, place the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. So do not place them on beams, stones, etc. Clean at least twice a year with bio cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter on wheels with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This polyester planter is also extremely useful as a divider in hospitality establishments. Features Polyester Planter on Wheels This polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof by default. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester extends into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Polyester Planter on Wheels SPECIFICATIONS: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Easy to move thanks to the wheels. Please note! Load capacity is 450 kg per wheel. Finished with a double folded rim. Polyester material thickness is 3 mm. Includes recessed wheels and circles for drilling drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage after drilling the drainage holes. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, place the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. So do not place them on beams, stones, etc. Clean at least twice a year with bio cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter on wheels with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This polyester planter is also extremely useful as a divider in hospitality establishments. Features Polyester Planter on Wheels This polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof by default. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester extends into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Polyester Planter on Wheels SPECIFICATIONS: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Easy to move thanks to the wheels. Please note! Load capacity is 450 kg per wheel. Finished with a double folded rim. Polyester material thickness is 3 mm. Includes recessed wheels and circles for drilling drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage after drilling the drainage holes. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, place the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. So do not place them on beams, stones, etc. Clean at least twice a year with bio cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter on wheels with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This polyester planter is also extremely useful as a divider in hospitality establishments. Features Polyester Planter on Wheels This polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof by default. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester extends into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Polyester Planter on Wheels SPECIFICATIONS: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Easy to move thanks to the wheels. Please note! Load capacity is 450 kg per wheel. Finished with a double folded rim. Polyester material thickness is 3 mm. Includes recessed wheels and circles for drilling drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage after drilling the drainage holes. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, place the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. So do not place them on beams, stones, etc. Clean at least twice a year with bio cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter on wheels with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This polyester planter is also extremely useful as a divider in hospitality establishments. Features Polyester Planter on Wheels This polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof by default. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester extends into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Polyester Planter on Wheels SPECIFICATIONS: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Easy to move thanks to the wheels. Please note! Load capacity is 450 kg per wheel. Finished with a double folded rim. Polyester material thickness is 3 mm. Includes recessed wheels and circles for drilling drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage after drilling the drainage holes. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, place the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. So do not place them on beams, stones, etc. Clean at least twice a year with bio cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter on wheels with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This polyester planter is also extremely useful as a divider in hospitality establishments. Features Polyester Planter on Wheels This polyester planter gives gardens a modern look. The polyester planter is intended for outdoor use, as it is not waterproof by default. We offer standard colors, and for an additional charge and on order, we also supply other colors. This ensures there is a matching polyester planter for every need. Our polyester planter is made of high-quality reinforced polyester. This ensures a sturdy planter. Because the reinforced polyester extends into the corners of the planter, the corners do not tear. The planter is colored throughout and therefore retains its color well. Polyester Planter on Wheels SPECIFICATIONS: 5-year warranty. Polyester planters are frost-resistant and reinforced against deformation. Lightweight and very strong. Easy to move thanks to the wheels. Please note! Load capacity is 450 kg per wheel. Finished with a double folded rim. Polyester material thickness is 3 mm. Includes recessed wheels and circles for drilling drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage after drilling the drainage holes. Professional maintenance products available from us. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not enclosed. This can cause stains that are difficult to remove. Always drill drainage holes in the bottom of the planter. The bottom is marked with circles for drilling. These circles are connected to a water channel. After drilling the drainage holes, place the overflow pipe. This ensures that no excess water remains in the planter. Polyester planters must always be placed directly on a flat surface. So do not place them on beams, stones, etc. Clean at least twice a year with bio cleaner/protector cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for cleaning. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of hydro granules. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This aluminium planter is also extremely useful as a partition in hospitality establishments. Features Aluminium Planter on Legs This aluminium planter gives gardens a timeless look. The planter is corrosion-resistant and not waterproof as standard. Additionally, the aluminum is very lightweight. The aluminum planter can remain outdoors all year round without being damaged or freezing. You will therefore enjoy this planter for years to come. After the aluminum planter has been produced, it undergoes several finishing processes. For instance, the material is roughened for better adhesion of the powder coating. This powder coating is available in various colors and is applied with a strong adhesive primer. Finally, the planter is treated with a hard top layer. This ensures that the CARREZ aluminum planter is scratch-resistant. Aluminum Planter on Legs SPECIFICATIONS: 5-year warranty. Material thickness of the aluminum is 3 mm. Other material thicknesses are also possible. Aluminum planters are very strong, wear-resistant, corrosion-resistant, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Easily movable. Scratch-resistant top layer. Customization is possible. Standard RAL colors are RAL 7016, RAL 7021, RAL 9005, and RAL 9016. Start-up costs are charged for other colors. Professional maintenance products available from us. Important points to consider: Products must be unpacked immediately upon receipt so that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Keep the drainage holes clear so that excess water can drain away. The warranty is void if you drill or grind in a manner that is not prescribed. Clean annually by spraying dirt off the planter with clean tap water and treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for this. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of drainage material. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This aluminium planter is also extremely useful as a partition in hospitality establishments. Features Aluminium Planter on Legs This aluminium planter gives gardens a timeless look. The planter is corrosion-resistant and not waterproof as standard. Additionally, the aluminum is very lightweight. The aluminum planter can remain outdoors all year round without being damaged or freezing. You will therefore enjoy this planter for years to come. After the aluminum planter has been produced, it undergoes several finishing processes. For instance, the material is roughened for better adhesion of the powder coating. This powder coating is available in various colors and is applied with a strong adhesive primer. Finally, the planter is treated with a hard top layer. This ensures that the CARREZ aluminum planter is scratch-resistant. Aluminum Planter on Legs SPECIFICATIONS: 5-year warranty. Material thickness of the aluminum is 3 mm. Other material thicknesses are also possible. Aluminum planters are very strong, wear-resistant, corrosion-resistant, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Easily movable. Scratch-resistant top layer. Customization is possible. Standard RAL colors are RAL 7016, RAL 7021, RAL 9005, and RAL 9016. Start-up costs are charged for other colors. Professional maintenance products available from us. Important points to consider: Products must be unpacked immediately upon receipt so that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Keep the drainage holes clear so that excess water can drain away. The warranty is void if you drill or grind in a manner that is not prescribed. Clean annually by spraying dirt off the planter with clean tap water and treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for this. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of drainage material. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This aluminium planter is also extremely useful as a partition in hospitality establishments. Features Aluminium Planter on Legs This aluminium planter gives gardens a timeless look. The planter is corrosion-resistant and not waterproof as standard. Additionally, the aluminum is very lightweight. The aluminum planter can remain outdoors all year round without being damaged or freezing. You will therefore enjoy this planter for years to come. After the aluminum planter has been produced, it undergoes several finishing processes. For instance, the material is roughened for better adhesion of the powder coating. This powder coating is available in various colors and is applied with a strong adhesive primer. Finally, the planter is treated with a hard top layer. This ensures that the CARREZ aluminum planter is scratch-resistant. Aluminum Planter on Legs SPECIFICATIONS: 5-year warranty. Material thickness of the aluminum is 3 mm. Other material thicknesses are also possible. Aluminum planters are very strong, wear-resistant, corrosion-resistant, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Easily movable. Scratch-resistant top layer. Customization is possible. Standard RAL colors are RAL 7016, RAL 7021, RAL 9005, and RAL 9016. Start-up costs are charged for other colors. Professional maintenance products available from us. Important points to consider: Products must be unpacked immediately upon receipt so that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Keep the drainage holes clear so that excess water can drain away. The warranty is void if you drill or grind in a manner that is not prescribed. Clean annually by spraying dirt off the planter with clean tap water and treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for this. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of drainage material. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This aluminium planter is also extremely useful as a partition in hospitality establishments. Features Aluminium Planter on Legs This aluminium planter gives gardens a timeless look. The planter is corrosion-resistant and not waterproof as standard. Additionally, the aluminum is very lightweight. The aluminum planter can remain outdoors all year round without being damaged or freezing. You will therefore enjoy this planter for years to come. After the aluminum planter has been produced, it undergoes several finishing processes. For instance, the material is roughened for better adhesion of the powder coating. This powder coating is available in various colors and is applied with a strong adhesive primer. Finally, the planter is treated with a hard top layer. This ensures that the CARREZ aluminum planter is scratch-resistant. Aluminum Planter on Legs SPECIFICATIONS: 5-year warranty. Material thickness of the aluminum is 3 mm. Other material thicknesses are also possible. Aluminum planters are very strong, wear-resistant, corrosion-resistant, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Easily movable. Scratch-resistant top layer. Customization is possible. Standard RAL colors are RAL 7016, RAL 7021, RAL 9005, and RAL 9016. Start-up costs are charged for other colors. Professional maintenance products available from us. Important points to consider: Products must be unpacked immediately upon receipt so that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Keep the drainage holes clear so that excess water can drain away. The warranty is void if you drill or grind in a manner that is not prescribed. Clean annually by spraying dirt off the planter with clean tap water and treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for this. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of drainage material. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This aluminium planter is also extremely useful as a partition in hospitality establishments. Features Aluminium Planter on Legs This aluminium planter gives gardens a timeless look. The planter is corrosion-resistant and not waterproof as standard. Additionally, the aluminum is very lightweight. The aluminum planter can remain outdoors all year round without being damaged or freezing. You will therefore enjoy this planter for years to come. After the aluminum planter has been produced, it undergoes several finishing processes. For instance, the material is roughened for better adhesion of the powder coating. This powder coating is available in various colors and is applied with a strong adhesive primer. Finally, the planter is treated with a hard top layer. This ensures that the CARREZ aluminum planter is scratch-resistant. Aluminum Planter on Legs SPECIFICATIONS: 5-year warranty. Material thickness of the aluminum is 3 mm. Other material thicknesses are also possible. Aluminum planters are very strong, wear-resistant, corrosion-resistant, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Easily movable. Scratch-resistant top layer. Customization is possible. Standard RAL colors are RAL 7016, RAL 7021, RAL 9005, and RAL 9016. Start-up costs are charged for other colors. Professional maintenance products available from us. Important points to consider: Products must be unpacked immediately upon receipt so that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Keep the drainage holes clear so that excess water can drain away. The warranty is void if you drill or grind in a manner that is not prescribed. Clean annually by spraying dirt off the planter with clean tap water and treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for this. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of drainage material. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This aluminium planter is also extremely useful as a partition in hospitality establishments. Features Aluminium Planter on Legs This aluminium planter gives gardens a timeless look. The planter is corrosion-resistant and not waterproof as standard. Additionally, the aluminum is very lightweight. The aluminum planter can remain outdoors all year round without being damaged or freezing. You will therefore enjoy this planter for years to come. After the aluminum planter has been produced, it undergoes several finishing processes. For instance, the material is roughened for better adhesion of the powder coating. This powder coating is available in various colors and is applied with a strong adhesive primer. Finally, the planter is treated with a hard top layer. This ensures that the CARREZ aluminum planter is scratch-resistant. Aluminum Planter on Legs SPECIFICATIONS: 5-year warranty. Material thickness of the aluminum is 3 mm. Other material thicknesses are also possible. Aluminum planters are very strong, wear-resistant, corrosion-resistant, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Easily movable. Scratch-resistant top layer. Customization is possible. Standard RAL colors are RAL 7016, RAL 7021, RAL 9005, and RAL 9016. Start-up costs are charged for other colors. Professional maintenance products available from us. Important points to consider: Products must be unpacked immediately upon receipt so that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Keep the drainage holes clear so that excess water can drain away. The warranty is void if you drill or grind in a manner that is not prescribed. Clean annually by spraying dirt off the planter with clean tap water and treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for this. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of drainage material. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This aluminium planter is also extremely useful as a partition in hospitality establishments. Features Aluminium Planter on Legs This aluminium planter gives gardens a timeless look. The planter is corrosion-resistant and not waterproof as standard. Additionally, the aluminum is very lightweight. The aluminum planter can remain outdoors all year round without being damaged or freezing. You will therefore enjoy this planter for years to come. After the aluminum planter has been produced, it undergoes several finishing processes. For instance, the material is roughened for better adhesion of the powder coating. This powder coating is available in various colors and is applied with a strong adhesive primer. Finally, the planter is treated with a hard top layer. This ensures that the CARREZ aluminum planter is scratch-resistant. Aluminum Planter on Legs SPECIFICATIONS: 5-year warranty. Material thickness of the aluminum is 3 mm. Other material thicknesses are also possible. Aluminum planters are very strong, wear-resistant, corrosion-resistant, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Easily movable. Scratch-resistant top layer. Customization is possible. Standard RAL colors are RAL 7016, RAL 7021, RAL 9005, and RAL 9016. Start-up costs are charged for other colors. Professional maintenance products available from us. Important points to consider: Products must be unpacked immediately upon receipt so that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Keep the drainage holes clear so that excess water can drain away. The warranty is void if you drill or grind in a manner that is not prescribed. Clean annually by spraying dirt off the planter with clean tap water and treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for this. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of drainage material. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This planter is also extremely useful as a partition in hospitality establishments. Aluminum Planter Features This aluminum planter gives gardens a timeless look. The planter is corrosion-resistant and not waterproof by default. Additionally, the aluminium is very lightweight. The aluminium planter can remain outdoors all year round without being damaged or freezing. You will therefore enjoy this planter for years to come. After the aluminium planter has been produced, it undergoes several finishing processes. For instance, the material is roughened for better adhesion of the powder coating. This powder coating is available in various colors and is applied with a strong adhesive primer. Finally, the planter is treated with a hard top layer. This ensures that this aluminium planter is scratch-resistant. Aluminum Planter SPECIFICATIONS: 5-year warranty. Aluminum planters are very strong, wear-resistant, corrosion-resistant, and durable. Material thickness of the aluminium is 3 mm. Other material thicknesses are also possible. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Scratch-resistant top layer. Customization is possible. Standard RAL colors are RAL 7016, RAL 7021, RAL 9005, and RAL 9016. Start-up costs are charged for other colors. Professional maintenance products available from us. Important points to consider: Products must be unpacked immediately upon receipt so that any moisture is not trapped between the packaging and the product. This can cause stains that are difficult to remove. Keep the drainage holes clear so that excess water can drain away. The warranty is void if you drill or grind in a manner that is not prescribed. Clean annually by spraying dirt off the planter with clean tap water and treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad for this. This damages the coating. PLANTING ADVICE: Place the overflow pipes in the prepared drainage holes. Fill the container with approx. 10 cm of drainage material. Place a water-permeable root barrier fabric over this. Apply soil suitable for your type of planting on top of this. Keep the drainage clear so that excess water can drain away.

Read more less

This Corten steel planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This Corten steel planter is also extremely useful as a partition in hospitality establishments. Features Corten Steel Planter on Legs This Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. SPECIFICATIONS: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Because the planter stands on legs, it is easy to move using, for example, a hand truck. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water must remain standing in the Corten steel planter.

Read more less

This Corten steel planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This Corten steel planter is also extremely useful as a partition in hospitality establishments. Features Corten Steel Planter on Legs This Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. SPECIFICATIONS: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Because the planter stands on legs, it is easy to move using, for example, a hand truck. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water must remain standing in the Corten steel planter.

Read more less

This Corten steel planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This Corten steel planter is also extremely useful as a partition in hospitality establishments. Features Corten Steel Planter on Legs This Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. SPECIFICATIONS: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Because the planter stands on legs, it is easy to move using, for example, a hand truck. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water must remain standing in the Corten steel planter.

Read more less

This Corten steel planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This Corten steel planter is also extremely useful as a partition in hospitality establishments. Features Corten Steel Planter on Legs This Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. SPECIFICATIONS: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Because the planter stands on legs, it is easy to move using, for example, a hand truck. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water must remain standing in the Corten steel planter.

Read more less

This Corten steel planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This Corten steel planter is also extremely useful as a partition in hospitality establishments. Features Corten Steel Planter on Legs This Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. SPECIFICATIONS: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Because the planter stands on legs, it is easy to move using, for example, a hand truck. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water must remain standing in the Corten steel planter.

Read more less

This Corten steel planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This Corten steel planter is also extremely useful as a partition in hospitality establishments. Features Corten Steel Planter on Legs This Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. SPECIFICATIONS: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Because the planter stands on legs, it is easy to move using, for example, a hand truck. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water must remain standing in the Corten steel planter.

Read more less

This Corten steel planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This Corten steel planter is also extremely useful as a partition in hospitality establishments. Features Corten Steel Planter on Legs This Corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which is formed by a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. SPECIFICATIONS: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes legs and drainage holes. This ensures that the planter floats slightly above the ground (90 mm) and has optimal drainage. Because the planter stands on legs, it is easy to move using, for example, a hand truck. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water must remain standing in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less

This planter with straight angles belongs in gardens with clean lines. The sleek double-folded edge finish gives the whole piece more substance. This corten steel planter is also extremely useful as a partition in hospitality establishments. Corten Steel Planter Features This corten steel planter gives gardens a powerful and warm appearance. This is due to the orange-brown color of the material, which forms through a natural layer of rust. Another name for Corten steel is weathering steel: weather conditions have a positive influence on this planter. Corten steel is a metal alloy consisting of iron, to which copper, phosphorus, silicon, nickel, and chromium have been added. When exposed to the outdoors, the material becomes covered with a protective layer of rust. This natural rust layer provides protection against further corrosion. As a result, the planter has a long lifespan. Corten Steel Planter Specifications: 5-year warranty. Corten steel planters are very strong, wear-resistant, weather-resistant, low-maintenance, and durable. Includes feet and drainage holes. This ensures that the planter floats slightly above the ground (15 mm) and has optimal drainage. Standard material thickness of the Corten steel is 2 mm. Other material thicknesses are also possible. Customization is possible. Products are delivered unrusted. The rusting process of Corten steel takes approximately 4-5 months, depending on weather conditions. Rust can be fixed by applying Owatrol. This is a penetrating anti-rust agent that forms a protective layer against rust. Owatrol protects the planter and ensures that the Corten steel no longer stains. Important points to note: Products must be unpacked immediately upon receipt so that any moisture between the packaging and the product is not trapped. This can cause irregular rust stains. Ensure proper drainage. Do not use an overflow pipe; no excess water should remain in the Corten steel planter. The material can then rust through due to a combination of oxygen and soil. Do not use hydro granules: these retain moisture. We advise against using Corten steel within a radius of 2 km from a coastline. During the rusting process, rust water may run off the product. The warranty is void if you drill or grind in a manner that is not prescribed. PLANTING ADVICE: Provide the soil with a layer of Ø35 mm sorting pebbles (approx. 10 cm). Lay a water-permeable root barrier fabric over the pebbles. Cover the root barrier fabric with soil suitable for your type of planting. Do not use an overflow pipe; No water should be allowed to remain in the Corten steel planter.

Read more less